A white line on the edge, a blurry logo, a green that looks dull. Most print problems start in the file. Here's the five-minute checklist we wish every customer used.

It's one of the most common calls we get. "The design looked perfect on my laptop. Why does the print look different?" Sometimes there's a hairline of white along one edge. Sometimes the logo is fuzzy. Very often the brand green looks a bit flat compared with the screen.
Here's the reassuring part: almost none of this is a printing fault. It starts in the design file, and every one of these problems is easy to prevent once you know what to check. Below is the same checklist we walk customers through on the phone. It takes about five minutes.
Printing happens on big sheets that are then cut to size. The cutting blade has a tiny margin of error. If your background stops exactly at the edge of the design, a sliver of white paper can show up after trimming. Bleed solves this by stretching your background a little beyond the final edge, so even if the cut shifts a hair, there's colour there.
For business cards, use 1.5mm of bleed, so an 89 x 51mm card is designed at 92 x 54mm. For leaflets, pamphlets, brochures, letterheads and certificates, use 3mm on every side, which makes an A4 page 216 x 303mm. Stickers and badges need 2mm beyond the cut line.
Bleed's opposite is the safe zone: a margin inside the edge where nothing important should sit. Names, phone numbers and logos placed too close to the edge risk being clipped. On cards, stickers and badges, keep critical content at least 3mm in. On leaflets and brochures, keep text 5mm from the edges and 3 to 4mm from any fold. For certificates, start decorative borders at least 8mm from the edge so the frame looks balanced.
DPI (dots per inch) is how much detail an image holds at the size it's printed. Screens look fine at 72 DPI, which is why an image can seem crisp on your laptop and still print soft. For print you want 300 DPI at the final size, and 400 to 500 DPI for very small text on things like business cards.
The classic mistake? Saving your logo from your website or a WhatsApp forward and dropping it into the print file. Those images are compressed and small, and they come out blurry. Always ask your designer for the original vector logo. If you don't have one, it's worth getting it made once. You'll use it for years.
Your screen makes colour by mixing red, green and blue light. A printer mixes cyan, magenta, yellow and black ink. Some very bright screen colours, especially neon greens, electric blues and hot pinks, simply can't be made with ink. If you send an RGB file, it gets converted automatically, and those colours can shift.
So convert to CMYK yourself before uploading, and look at the result. If your brand has specific colours, note down their CMYK values in your brand guide so every printed item matches, from your cards to your letterheads.
If the font you used isn't included in the file, the printer's system may swap in a different one, and suddenly your spacing and line breaks change. When exporting a PDF, embed the fonts, or convert text to outlines. And keep small text readable: at least 7pt on cards and 8pt on leaflets.
Spot UV, foiling and custom cut shapes each need their own layer or file. For UV business cards, that's a separate vector PDF with 100% black wherever the UV should go. For custom shape stickers, it's a vector cut line on its own layer, tracing exactly where the blade should cut.
| Format | Quality | Note |
|---|---|---|
| PDF (vector) | Best | Embed fonts, include bleed |
| AI | Excellent | Outline fonts first |
| PSD | Good | 300 DPI canvas, flatten effects |
| PNG or JPG | Acceptable | Only at high resolution |
This one has nothing to do with software. Read every phone number out loud. Check the spelling of names and the address, letter by letter. Confirm the email and website. Then ask someone else to read it too, because you'll see what you meant to write rather than what's actually there. We send a digital proof before production, and it's your last chance to catch a typo before it's printed five hundred times.
A bakery once ordered a large batch of leaflets for their Diwali sweets. The design was gorgeous. The phone number, though, sat 1mm from the bottom edge, and after trimming, the last digit was half cut off. Everyone who called got a wrong number. Nobody at the bakery noticed in the proof because they knew their own number by heart and their eyes filled in the gap.
That's exactly why the safe zone and the "read it like a stranger" step matter. Neither costs anything, and together they would have saved that whole print run.
Plenty of our customers design in Canva or on their phones, and that's completely fine. Just download as "PDF Print", tick the crop marks and bleed option, and choose the largest size available. If the app lets you pick a colour profile, choose CMYK. And always check that photos you used are high quality to begin with, because no export setting can rescue a blurry original.
Before every upload, run through this quickly: bleed added, important content inside the safe zone, images at 300 DPI, file in CMYK, fonts embedded or outlined, finish layers supplied separately, exported as a print-ready PDF, and proofread by a second person. That's it.
Each product page on Priinteve also has its own design guidelines with exact sizes for that item. Open the page for whatever you're printing, check those numbers, and upload with confidence. And if something in your file looks off, we'd much rather you call us before printing than after.